LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LCV) - Repair Instructions >> Repair Instructions >> Charge Air Cooler Outlet Air Tube Replacement (LTG) >> Removal Procedure

Removal Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Disconnect the intake air pressure and temperature sensor electrical connector.
    3. Fig 1: Charge Air Cooler Outlet Air Hose, Fastener And Retainer Spring
    GM3923105Courtesy of GENERAL MOTORS COMPANY
  3. Remove the charge air cooler outlet air hose fastener (1).
  4. Unclip the retainer spring (2) and remove the charge air cooler outlet air hose (3) from the throttle body.
    5. Fig 2: Charge Air Cooler Outlet Air Hose
    GM3923129Courtesy of GENERAL MOTORS COMPANY
  5. Remove the charge air cooler outlet air hose (1) from the charge air cooler.
scientia non olet · About LEMON Manuals