Camshaft Position Actuator Intake Solenoid Valve Replacement

Fig 1: Camshaft Position Actuator Intake Solenoid Valve

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement (LTG)Intake Manifold Cover Replacement (LCV) Disconnect the electrical connector.
1	Camshaft Position Actuator Intake Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Intake Solenoid Valve Procedure If reusing the OLD solenoid valve, install a NEW seal. NOTE: A NEW solenoid valve will come with a NEW seal.

Callout

Component Name

Preliminary Procedures

Camshaft Position Actuator Intake Solenoid Valve Fastener

CAUTION:

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Intake Solenoid Valve
Procedure
If reusing the OLD solenoid valve, install a NEW seal.

NOTE:

A NEW solenoid valve will come with a NEW seal.