LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Enclave Leather, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Replacement (Traverse)

Front Bumper Fascia Replacement (Traverse)

Fig 1: Front Bumper Fascia (Traverse)
GM2869287Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement (Acadia, Enclave, Traverse) .
  2. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement (Traverse) .
1 Front Bumper Fascia Lower Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .
2 Front Bumper Fascia Bolt (Qty: 2)
3 Front Bumper Fascia Upper Screw (Qty: 7)
4 Front Bumper Fascia Upper Bolt (Qty: 2)
5 Front Fascia

Procedure

  1. Carefully push a small nylon wedge between the fascia and the front fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the front fascia guide.
  2. Disconnect any electrical connectors.
  3. Transfer components as necessary.
scientia non olet · About LEMON Manuals