Hood Latch Support Replacement (Acadia, Enclave, Traverse)

Fig 1: Hood Latch Support (Acadia, Enclave, Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the hood primary and secondary latch. Refer to Hood Primary and Secondary Latch Replacement .
1	Hood Latch Support Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten  10 N.m (89 lb in)
2	Hood Latch Support Bolt (Qty: 2) Tighten  10 N.m (89 lb in)
3	Hood Latch Support Unclip the electrical harness from the hood latch support.