B52E Heated Oxygen Sensor - Bank 2 Sensor 1
WARNING: This page is about a different car, the 2017 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-16 (LT GN) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 0.5 |
GY/WH GN/YE |
3122 3212 |
Heated Oxygen Sensor Heater Low Control Bank 1 Sensor 2 Heated Oxygen Sensor Heater Low Control Bank 2 Sensor 1 |
I I |
LT1 LT4 |
| 2 | 0.5 0.5 |
VT/BU VT/BU |
5294 5293 |
Powertrain Main Relay Fused Supply 5 Powertrain Main Relay Fused Supply 4 |
I I |
LT1 LT4 |
| 3 | 0.5 0.5 |
WH/YE YE/WH |
3121 3211 |
Heated Oxygen Sensor Low Signal Bank 1 Sensor 2 Heated Oxygen Sensor Low Signal Bank 2 Sensor 1 |
I I |
LT1 LT4 |
| 4 | 0.5 0.5 |
VT/BU VT/WH |
3120 3210 |
Heated Oxygen Sensor High Signal Bank 1 Sensor 2 Heated Oxygen Sensor High Signal Bank 2 Sensor 1 |
I I |
LT1 LT4 |