B172RF Brake Pad Wear Sensor - Right Front (J57)
WARNING: This page is about a different car, the 2017 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-13 (BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | J-35616-3 (GY) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 0.5 |
BN/WH WH/BU |
4901 1611 |
Direct Fuel Injector (DFI) High Voltage Supply Cylinder 1 Brake Lining Wear Sensor Signal Right Rear |
II I |
J57 LT4 |
| 2 | 0.5 0.5 |
GN/GY BN |
4903 1613 |
Direct Fuel Injector (DFI) High Voltage Supply Cylinder 3 Brake Lining Wear Sensor Signal Right Front |
II I |
J57 LT4 |
| 3 | 0.5 | GN/WH | 4905 | Direct Fuel Injector (DFI) High Voltage Supply Cylinder 5 | II | - |
| 4 | 0.5 | WH/YE | 4907 | Direct Fuel Injector (DFI) High Voltage Supply Cylinder 7 | II | - |
| 5 | 0.5 | BN | 4801 | Direct Fuel Injector (DFI) High Voltage Control Cylinder 1 | II | - |
| 6 | - | - | - | Not Occupied | - | - |
| 7 | 0.5 | GN | 4803 | Direct Fuel Injector (DFI) High Voltage Control Cylinder 3 | II | - |
| 8 | 0.5 | WH/GN | 4805 | Direct Fuel Injector (DFI) High Voltage Control Cylinder 5 | II | - |
| 9 | 0.5 | YE/GY | 4807 | Direct Fuel Injector (DFI) High Voltage Control Cylinder 7 | II | - |
| 10 | 0.5 | BN/RD | 2917 | Fuel Rail Pressure Sensor 5V Reference | II | - |
| 11 | 0.5 | BU/WH | 2918 | Fuel Rail Pressure Sensor Signal | II | - |
| 12 | 0.5 | BK/GN | 2919 | Fuel Rail Pressure Sensor Low Reference | II | - |