|
Preliminary Procedures
- Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement (Acadia)
.
- Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Acadia, Enclave, Traverse)
.
|
| 1 |
Front Bumper Fascia Bolt (Qty: 2)
|
| 2 |
Front Bumper Upper Fascia Bolt (Qty: 7) |
| 3 |
Front Bumper Fascia Side Bracket Bolt (Qty: 2) |
| 4 |
Front Fascia Lower Bolt (Qty: 2) |
| 5 |
Front Bumper Fascia Procedure
- Carefully push a small nylon wedge between the fascia and the front fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the front fascia guide.
- Disconnect any electrical connectors.
- Transfer parts as needed.
|