LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Outside Air Temperature Display Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle in Service Mode.
  2. Verify the scan tool ECM Ambient Air Temperature parameter is between -40°C (-40°F) and +88°C (+190°F) and changes with air temperature changes.
    • If not between -40°C (-40°F) and +88°C (+190°F) or changes with air temperature changes 

      Refer to Circuit/System Testing.

    • If between -40°C (-40°F) and +88°C (+190°F) and changes with air temperature changes 
  3. All OK.
scientia non olet · About LEMON Manuals