Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (2.4L LEA)

Fig 1: Compressor Pressure Relief Valve & Seal (2.4L LEA)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1	Compressor Pressure Relief Valve CAUTION: Refer to Fastener Caution . Procedure Disconnect the refrigerant pressure sensor electrical connector. Use the GE-39400-A detector to leak test the A/C compressor fittings. Tighten 6 N.m (53 lb in) Special Tools GE-39400-A Electronic Halogen Leak Detector For equivalent regional tools, refer to Special Tools .
2	Compressor Pressure Relief Valve Seal

Callout

Component Name

Preliminary Procedures
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

Compressor Pressure Relief Valve

CAUTION:

Procedure

Tighten
6 N.m (53 lb in)
Special Tools
GE-39400-A Electronic Halogen Leak Detector
For equivalent regional tools, refer to Special Tools .

Compressor Pressure Relief Valve Seal