Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0030-P0032 or P0036-P0038
- The ignition voltage is between 11-32 V.
- The engine speed is greater than 400 RPM.
- The DTCs run continuously once the above conditions are met for 10 s.
P0053 or P0054
- DTCs P0112, P0113, P0117, P0118, P0128, P2610 are not set.
- The engine is running.
- Ignition voltage is less than 32 V.
- The ignition is OFF for greater than 8 h.
- The Engine Coolant Temperature (ECT) is between -30 to +45°C (-22 to +113°F) at engine start-up.
- DTCs P0053 and P0054 run once per drive cycle when the above conditions are met.
P0135 or P0141
- DTCs P0116, P0117, P0118, P0128 are not set.
- The ECT is hotter than 70°C (158°F).
- The Ignition voltage is between 10-32 V.
- DTC P0135 and P0141 run twice per drive cycle when the above conditions are met for 2 min.