LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls And Fuel - 2.4L (Lea) - Repair Instructions) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the fuel tank. Refer to Fuel Tank Replacement .
    3. Fig 1: Fuel Tank Pressure Sensor, Wiring Harness Plug & Pump Module Clip
    GM2595045Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the fuel tank pressure sensor wiring harness plug (2).
  4. Unclip the fuel tank pressure sensor (3) from the fuel tank pump module clip (1).
scientia non olet · About LEMON Manuals