Oil Pressure Relief Valve Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Oil Pressure Relief Valve

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement . Remove front compartment splash shield right side. Refer to Front Compartment Splash Shield Replacement . Remove right wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
1	Oil Pressure Relief Valve CAUTION: Refer to Fastener Caution . Tighten 40 N.m (30 lb ft)
2	Oil Pressure Relief Valve Seal Ring Procedure DISCARD the seal ring and use NEW only.

Callout

Component Name

Preliminary Procedure

Remove front wheelhouse liner right side. Refer to Front Wheelhouse Liner Replacement .
Remove front compartment splash shield right side. Refer to Front Compartment Splash Shield Replacement .
Remove right wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .

Oil Pressure Relief Valve

CAUTION:

Tighten
40 N.m (30 lb ft)

Oil Pressure Relief Valve Seal Ring
Procedure
DISCARD the seal ring and use NEW only.