LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L (Lea)) >> Repair Instructions - On Vehicle >> Intake Manifold Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake manifold insulator. Refer to Intake Manifold Insulator Replacement .
  2. Remove the manifold absolute pressure sensor from the intake manifold. Refer to Manifold Absolute Pressure Sensor Replacement .
  3. Remove the fuel pump cover only from the fuel pump. Refer to Fuel Pump Replacement .
    4. Fig 1: Intake Manifold & Mounting Components
    GM2577143Courtesy of GENERAL MOTORS COMPANY
  4. Remove the 2 intake manifold nuts (3) and the 5 intake manifold bolts (4).
  5. Remove the intake manifold (2) and the 4 intake manifold gaskets (1).
scientia non olet · About LEMON Manuals