LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L (Lea)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  3. Remove the front part of the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  4. Install the EN-44811  tensioner unloader.
  5. Tension the drive belt tensioner counterclockwise and hold tension.
    6. Fig 1: Drive Belt Routing
    GM2512751Courtesy of GENERAL MOTORS COMPANY
  6. Remove the drive belt (1).
  7. Release tension from the drive belt tensioner and allow the tensioner to slide back slowly.
scientia non olet · About LEMON Manuals