LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L (Lea)) >> Repair Instructions - On Vehicle >> Cylinder Head Opening Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Cylinder Head Opening Plate, Gasket & Bolts
    GM2577137Courtesy of GENERAL MOTORS COMPANY
  1. Install the cylinder head opening plate (2) with the NEW cylinder head opening plate gasket (1).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the cylinder head opening plate bolts (3) and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals