LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L (Lea)) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the automatic transmission. Refer to Transmission Replacement (2.4L LEA) .
    2. Fig 1: Flywheel Holding Tool
    GM2512743Courtesy of GENERAL MOTORS COMPANY
  2. Install the EN-43653  holding tool (1) in the starter assembly location, engaging the automatic flex plate, in order to prevent crankshaft rotation.
    3. Fig 2: Automatic Flex Plate & Bolts
    GM2512742Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the 6 automatic transmission flex plate bolts (2) and the automatic flex plate (1).
scientia non olet · About LEMON Manuals