Camshaft Cover Removal (LAF, LEA, or LUK)
WARNING: This page is about a different variant/trim than selected.
- Remove the rear lift bracket (1).
- Remove the front lift bracket (1).
- Remove the ignition coil (1).
- Remove the camshaft housing cover insulator (1).
- Remove the camshaft cover assembly (1).
- Remove and discard the camshaft cover gasket, camshaft cover grommets, and camshaft cover bolts if they are serviced with the grommet.
NOTE:
DO NOT remove the PCV hose from the camshaft cover. If damage to the hose or connectors is present, the cover must be replaced.