Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
- Observe the Misfire Counters or perform the Fuel Injector Balance Test to help identify a leaking fuel injector.
- The fuel injectors are calibrated to begin operating at these pressures:
- 0.8 Mpa (116 psi) at 20-32°C (68-90°F) with nonblended gasoline
- 2.45 Mpa (355 psi) at 20°C (68°F) with E85 blended gasoline
- 2.35 Mpa (341 psi) at 24°C (75°F) with E85 blended gasoline
- 2.2 Mpa (319 psi) at 32°C (90°F) with E85 blended gasoline
- These specifications will vary when the temperature is outside of this range.