Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0016, P0017, P0030, P0036, P0053, P0054, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P013A, P013B, P013E, P013F, P0140, P0141, P015A, P015B, P0178, P0179, P0201, P0202, P0203, P0204, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0300, P0301, P0302, P0303, P0304, P0340, P0341, P0365, P0366, P0411, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0458, P0459, P0496, P0498, P0499, P111E, P1133, P1248, P1249, P124A, P124B, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157, P219A, P2227, P2228, P2229, P2230, P2269, P2270, P2271, P2440, P2444, or P2A00 is not set.
The barometric pressure is greater than 70 kPa (10.2 PSI).
The manifold absolute pressure is between 0-200 kPa (0-29 PSI).
The intake air temperature is between -20°C and +200°C (-4°F and +392°F).
The start-up engine coolant temperature is warmer than -20°C (-4°F).
The engine is in Closed Loop status.
The fuel control intrusive diagnostics are not active.
The engine is operating under light acceleration, heavy acceleration, or cruise conditions.
DTC P2097 runs continuously when the conditions above have been met.