Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0601, P0602, P0630
These DTCs run continuously when the ignition is ON.
P0603, P062F
These DTCs run during ECM power up.
P0604
DTC P0604 runs continuously when the ignition is ON for greater than 30 s.
P0606, P062B
- The ignition is ON.
- System voltage is greater than 11 V.
- These DTCs run continuously when the above conditions are met.
P16F3
- The engine speed is greater than 650 RPM.
- DTCs P0101, P0102, P0103, P0106, P0107, P0108, P2227, P2228, P2229, or P2230 are not set
- DTC P16F3 runs continuously when the above conditions are met.
P262B
DTC P262B runs during ECM power down.