LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LHU) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:

Refer to Safety Goggles and Fuel Warning .

CAUTION:

Use care while handling the fuel sender to prevent damage and incorrect fuel level readings.

  1. Remove the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
  2. Fig 1: Fuel Sender Assembly
    GM2371645Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the fuel sender assembly wiring harness plugs (1).
  4. Unclip the 2 fuel sender retainer pins.
  5. Remove the fuel sender assembly (2).