LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LHU) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Sender Assembly
    GM2371645Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel sender assembly (2).
  2. Connect the fuel sender assembly wiring harness plugs (1).
  3. Install the fuel tank fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .