LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case - AAM >> Repair Instructions - On Vehicle >> Transfer Case Fluid Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Fig 1: View Of Transfer Case Oil Drain Plug
    GM2371786Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • When performing the following procedure, use only hand tools to remove and install the drain and fill plugs.
    • Ensure that an approved drain pan is used when draining the transfer case.
  3. Remove and DISCARD the oil drain plug (1) and seal.
  4. Fig 2: Identifying Transfer Case Fill Plug
    GM2371788Courtesy of GENERAL MOTORS COMPANY
  5. Remove and DISCARD the fill plug (1) and seal.
  6. Allow the transfer case to drain completely.