LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case - AAM >> Repair Instructions - On Vehicle >> Front Output Shaft Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
    2. Fig 1: Wheel Drive Shaft Seal And Dust Deflector
    GM3458381Courtesy of GENERAL MOTORS COMPANY
  2. Remove the dust deflector (1) first using a prying type tool and then remove the seal (2) by installing a sheet metal screw into surface and removing with suitable pliers.
  3. Discard the seal assembly (1, 2).
scientia non olet · About LEMON Manuals