LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case - AAM >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Rear Output Shaft Seal Removal

Rear Output Shaft Seal Removal

    Fig 1: View Of Rear Output Shaft Seal Sleeve
    GM2371792Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Be sure to only pry against the five flat bosses on the rear output shaft housing.

  1. Remove the inner metal sleeve (1) from the seal by working a screwdriver around the perimeter of the sleeve, prying only against the flat bosses of the output shaft housing.
    2. Fig 2: View Of Rear Output Shaft Seal
    GM2491265Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Be sure to only pry against the five flat bosses on the rear output shaft housing.
    • The seal tension spring (2) may fall off as the seal is removed.
  2. Remove the rear output shaft seal (1) by working a sharpened chisel around the perimeter of the seal, prying only against the flat bosses of the output shaft housing.
  3. Ensure the seal tension spring (2) is removed from the bore.
scientia non olet · About LEMON Manuals