Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation
.
- Using a suitable jack stand, support the rear of the powertrain.
Courtesy of GENERAL MOTORS COMPANY
- Remove the transmission mount to bracket through bolt (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the transaxle brace bolt (1), then loosen bolt (2) until it no longer engages the transaxle.
- Remove the transaxle brace (3) with bolt (2) still retained in the brace.
Courtesy of GENERAL MOTORS COMPANY
- Remove the transmission mount bracket (1) to transmission bolts (2).
Courtesy of GENERAL MOTORS COMPANY
- Remove the rear mount to frame fasteners (1,2), then remove the mount and bracket from the vehicle.