Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation
.
- Using a suitable jack stand, support the rear of the powertrain.
Courtesy of GENERAL MOTORS COMPANY
- Remove the transmission mount to bracket through bolt (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the rear mount to frame fasteners (2), then remove the mount (3) from the vehicle.
Courtesy of GENERAL MOTORS COMPANY
- Remove the three transmission mount to transmission bolts (1).
- Remove the transmission mount bracket (2) from the vehicle.