| 4-5-6 Clutch Assembly |
- Inspect for leaking 4-5-6 clutch piston (433) and piston seals (430-432).
- Inspect for plugged or restricted 4-5-6 piston dam air bleed.
- Inspect for fatigued 4-5-6 clutch piston spring (434).
- Inspect for leaking 4-5-6 clutch dam seals (435).
- Inspect for improper surface finish on 4-5-6 clutch plates (439-441).
- Inspect for porous, improper surface finish, seal groove damage or plugged or restricted oil passages of the 3-5-rev/4-5-6 housing (422).
- Inspect for leaking or damaged 4-5-6 piston dam (435).
|