Conditions for Running the DTC

P182E

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0716, P0717, P0722, or P0723 is not set.
• Engine speed is 400-7500 RPM for 5s.
• Ignition voltage is 8.6-32V.
• Engine torque signal is valid.

P1915

• DTC P0722, P0723, or P1915 is not set.
• Transmission output shaft speed is 90 RPM or less.
• Ignition voltage was 5V or greater, and has not dropped below 2V.