Conditions for Running the DTC

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Ignition voltage is greater than 8.5V.
Engine speed is 400-7,500 RPM for 5s.
Output speed is 36 RPM or greater, or the accelerator pedal position is 0.5% or greater.
Throttle position signal is valid.
High side driver is enabled.
Transmission fluid temperature is -6.7°C (20°F) or greater.
Engine torque is 20 N.m (15 lb ft) or greater when 1st gear is commanded-DTC P0797 only.