Circuit/System Verification
- Ignition ON.
- Verify the scan tool ISS/OSS Supply Voltage parameter displays OK.
- IF OK is not displayed
Refer to Circuit/System Testing.
- If OK is displayed
- IF OK is not displayed
- Engine idling, transmission in Park, parking brake applied, and drive wheels chocked.
- Verify the scan tool Transmission ISS parameter changes or does not drop out while varying the engine speed.
- If the Transmission ISS does not vary with engine speed or drops out
Refer to Circuit/System Testing.
- If the Transmission ISS varies with engine speed and does not drop out
- If the Transmission ISS does not vary with engine speed or drops out
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.