Stabilizer Shaft Link Replacement (GNE)

Fig 1: Stabilizer Shaft Link (GNE)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Stabilizer Shaft Link Nut (Qty:2) CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Stabilizer Shaft Link

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

Stabilizer Shaft Link Nut (Qty:2)

CAUTION:

Tighten
50 N.m (37 lb ft)

Stabilizer Shaft Link