Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
.
- If equipped, disconnect the electronic suspension front position sensor from the lower control arm.
- Disconnect any harnesses or retainers secured to the front lower control arm. Note any attaching points to aid in installation.
Courtesy of GENERAL MOTORS COMPANY
- Remove the front lower control arm rear nuts (1) and bolts (2). Discard the nuts and bolts.
Courtesy of GENERAL MOTORS COMPANY
- Remove the steering knuckle nut (3) and bolt (1). Discard the nut and bolt.
- Remove the steering knuckle bolt (1) at the front lower control arm. Discard the bolt.
- Remove the front lower control arm front nut (4) and rear nut. Discard the nuts.
- Remove the front lower control arm front bolts (5). Discard the bolts.
- Remove the front lower control arm (2) from the vehicle.