LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Front Wheel Bearing and Hub Replacement (GNA) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the front wheel drive shaft from the front wheel bearing and hub assembly. Refer to Front Wheel Drive Shaft Replacement - Left Side , or Front Wheel Drive Shaft Replacement - Right Side .
  4. Remove the front brake rotor. Refer to Front Brake Rotor Replacement (J60, J61) Or Front Brake Rotor Replacement (J64) .
  5. Remove the front wheel speed sensor. Refer to Front Wheel Speed Sensor Replacement (Without F45) or Front Wheel Speed Sensor Replacement (With F45) .
    6. Fig 1: Front Wheel Bearing And Hub Assembly
    GM2911108Courtesy of GENERAL MOTORS COMPANY
  6. Remove the front wheel bearing and hub assembly bolts (1).
    7. Fig 2: Front Wheel Bearing And Hub Assembly With Front Brake Shield
    GM2911109Courtesy of GENERAL MOTORS COMPANY
  7. Remove the front wheel bearing and hub assembly (1) and front brake shield (2) from the steering knuckle.
scientia non olet · About LEMON Manuals