Removal Procedure
- Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
- Cap or tape the A/C refrigerant components.
- Remove the sealing washer (1) from the A/C refrigerant component.
- Inspect the seal washer for signs of damage to help determine the root cause of the failure.
- Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
- DISCARD the sealing washer.
NOTE:
Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
NOTE:
DO NOT reuse sealing washer.