Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0A2B
The Motor temperature is more than 25°C (45°F) greater than the average of the 14 volt power module temperature sensors and the power inverter module temperature.
P0A2C
Motor temperature sensor signal is greater than 215°C (419°F) for 1 second.
P0A2D
Motor temperature sensor signal is less than -40°C (-40°F) for 1 second after a warm up condition when drive motor generator torque is greater than 10 N.m (89 lb in) for 90 seconds.