Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The hybrid/EV battery pack contains a total of 32 cell groups in the hybrid/EV battery pack assembly. These cell groups are electrically connected in series. Each individual cell group is rated at 3.7 V, for a nominal system voltage of 118 V DC. The battery cells are grouped together into two sections, each with 16 cell groups.

The battery energy control module monitors the voltage of the 32 battery cell groups. A voltage sense circuit is attached to each individual cell group. Each of these circuits terminate at a connector located on the top surface of the battery section. A serviceable auxiliary battery wiring harness connectors the voltage sense circuits to the battery energy control module, located directly above the hybrid/EV battery pack.

Diagnostics and system status are communicated from the battery energy control module to hybrid powertrain control module through serial data.