LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0AC1, P0AC2, P1A07, or P1EBA: Hybrid/EV Battery Current Sensor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition ON.
  2. Verify the scan tool Hybrid/EV Battery Pack Low Resolution Current Sensor parameter is between 85 A and -85 A and varies as the vehicle is driven.
    • If not between 85 A and -85 A or does not vary 

      Refer to Circuit/System Testing.

    • If between 85 A and -85 A and varies 
  3. All OK.
scientia non olet · About LEMON Manuals