Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition ON.
Verify DTC P0651, P0806, P0807, or P0808 is not set.
- If DTC P0651, P0806, P0807, or P0808 is set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If DTC P0651, P0806, P0807, or P0808 is not set
Perform the clutch pedal position sensor learn procedure.
- If the clutch pedal position sensor learn was not successful
  Refer to Circuit/System Testing.
- If the clutch pedal position sensor learn was successful
Ignition ON.
Verify DTC P080A ran and passed this ignition cycle. Operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records.
- If the scan tool indicates DTC P080A failed
  Refer to Circuit/System Testing.
- If the scan tool indicates DTC P080A ran and passed this ignition cycle
All OK.