LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 6T40 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Transaxle Mount & Attachment Bolts
    GM2199370Courtesy of GENERAL MOTORS COMPANY
  1. Install the transaxle mount (1).
  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the transaxle mount bolts (2) and tighten to 62 N.m (46 lb ft).
  4. Fig 2: Identifying Front Transmission Mount Through Bolt
    GM2199369Courtesy of GENERAL MOTORS COMPANY
  5. Install the transaxle mount through bolt (1) and tighten to 100 N.m (74 lb ft).
  6. Perform the Powertrain Mount Balancing Lower procedure. Refer to the appropriate engine section.
  7. Lower the vehicle.