LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transaxle Clutch) >> Repair Instructions >> Clutch Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Clutch Pedal Position Sensor And Bolt
    GM2028127Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect clutch pedal position sensor wiring harness connector.
  2. Remove clutch pedal position sensor bolt (2).
  3. Remove clutch pedal position sensor (1).