LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transaxle Clutch) >> Repair Instructions >> Clutch Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Clutch Pedal Position Sensor And Bolt
    GM2028127Courtesy of GENERAL MOTORS COMPANY
  1. Install clutch pedal position sensor (1).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install clutch pedal position sensor bolt (2) and tighten to 3 N.m (27 lb in).
  3. Connect clutch pedal position sensor wiring harness connector.
  4. Learn clutch pedal position sensor.
scientia non olet · About LEMON Manuals