2-6 Clutch Releases

2-6 Pressure Control (PC) Solenoid 

The 2-6 PC solenoid is commanded OFF, allowing PCS 2-6 clutch fluid to exhaust from the 2-6 clutch regulator valve.

2-6 Clutch Regulator Valve 

2-6 clutch regulator valve spring force moves the valve to the released position, allowing 2-6 clutch fluid from the 2-6 clutch to pass through the valve and enter the exhaust backfill fluid circuit.

2-6 Clutch 

2-6 clutch spring force moves the 2-6 clutch piston to release the 2-6 clutch plates and force 2-6 clutch fluid to exhaust from the transmission case assembly. The exhausting 2-6 clutch fluid pressure is routed to the 2-6 clutch regulator valve where it enters the exhaust backfill fluid circuit.