1-2-3-4 Clutch Releases

WARNING: This page is about a different variant/trim than selected.

1-2-3-4 Pressure Control (PC) Solenoid

The 1-2-3-4 PC solenoid is commanded OFF, allowing PCS 1-2-3-4 clutch fluid to exhaust from the 1-2-3-4 clutch regulator valve and the 1-2-3-4 clutch boost valve.

1-2-3-4 Clutch Regulator Valve

1-2-3-4 clutch regulator valve spring force moves the valve to the released position, allowing 1-2-3-4 clutch fluid pressure from the 1-2-3-4 clutch to pass through the valve and enter the exhaust backfill circuit. The exhausting 1-2-3-4 clutch fluid pressure is routed through orifice #21 in order to help control the release of the 1-2-3-4 clutch.

1-2-3-4 Clutch Boost Valve

1-2-3-4 clutch boost valve spring force moves the 1-2-3-4 clutch boost valve to the released position, allowing 1-2-3-4 clutch feedback fluid pressure to exhaust from the 1-2-3-4 clutch regulator valve into the 1-2-3-4 clutch circuit.

1-2-3-4 Clutch

1-2-3-4 clutch spring force moves the 1-2-3-4 clutch piston to release the 1-2-3-4 clutch plates and force 1-2-3-4 clutch fluid to exhaust from the transmission case assembly. The exhausting 1-2-3-4 clutch fluid is routed to the 1-2-3-4 clutch regulator valve where it enters the exhaust backfill circuit.