LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Hybrid/EV System Heating And Cooling) >> Repair Instructions >> Generator Control Module Cooling Air Outlet Duct Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Generator Control Module Cooling Air Outlet Duct And Tighten Fasteners
    GM2601904Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the generator control module cooling air outlet duct (2) and tighten the fasteners (1) to 9 (80 lb in).
  2. Fig 2: Drive Motor Battery Cooling Blower Outlet Duct Fastener
    GM2571127Courtesy of GENERAL MOTORS COMPANY
  3. Install the drive motor battery cooling blower outlet duct (2) and tighten the fasteners (1) to 9 (80 lb in).
  4. Enable the hybrid battery. Refer to High Voltage Enabling .