Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON.
- Verify the scan tool Battery Energy Control Module Battery Temperature parameters are all be between -39° and 60°C (-38.2 and 140°F).
- If not between -39° and 60°C (-38.2 and 140°F)
Refer to Circuit/System Testing.
- If between -39° and 60°C (-38.2 and 140°F)
- If not between -39° and 60°C (-38.2 and 140°F)
- All OK.