Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0969
TCM detects an internal electrical performance malfunction of the pressure control solenoid Valve 3 control circuit where the measured pressure control solenoid Valve 3 currents does not equal the commanded clutch pressure control solenoid valve 3 current for 5s.
P0970
TCM detects a short to ground on the pressure control solenoid Valve 3 control circuit for 1s.
P0971
TCM detects an open or short to voltage on the pressure control solenoid valve 3 control circuit for 1s.