Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0965
TCM detects an internal electrical performance malfunction of the pressure control solenoid Valve 2 control circuit where the measured pressure control solenoid valve 2 current does not equal the commanded pressure control solenoid Valve 2 current for 5s.
P0966
TCM detects a short to ground on the pressure control solenoid Valve 2 control circuit for 1s.
P0967
TCM detects an open or short to voltage on the pressure control solenoid Valve 2 control circuit for 1s.