Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0850 and P0851

ECM detects the Park/Neutral switch signal equals 0V (Park/Neutral) when the transmission internal mode switch reports a Drive range.
Throttle position is 10% or greater.
Engine torque is 75 N.m (55 lb ft) or greater.
Vehicle speed is 10 km/h (6 MPH) or greater.
Above conditions must be met for 0.2s.

P0852

ECM detects the Park/Neutral switch signal equals 12V (In Gear) when the IMS reports a Park/Neutral range for 0.2s.