Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0751
- Commanded gear is 1st.
- TCM detects gear ratio 1.37-1.52.
- Gearbox slip is 400 RPM or greater for 2s.
- Conditions listed above have to occur 8times.
P0752
- Commanded gear is 3rd.
- Transmission has achieved 1st or 2nd.
- Gear slip is 400 RPM or greater for 1.5s.
- TCM commands 4th gear if above conditions exist and detects a gear ratio of 4.35-4.81 for 1.5s.
- Conditions listed above have to occur 5times.